Filter
Top Products
STB & PVR Function
51
2) Add New Timer
To set a new timer, press
POP-UP
then
OK
to display the timer list.
Then press the
RED
button to display the “Add Timer” window, as
shown below.
You can configure the following items;
Service: Select the service you wish to record. The default setting is
the service that you are currently viewing. To change it, press
OK
to
display the service list. Use the
UP/DOWN
buttons to select your
desired service, and then press
OK
. To record a radio service, press
the
TV/RADIO
button to change to the radio service list.
Date: Set the start date of the recording. Move the cursor with the
LEFT/RIGHT
buttons and change the date with the
CH+/CH-
buttons or by using the
NUMERIC
buttons
Start Time: Set the start time of the recording. Move the cursor with
the
LEFT/RIGHT
buttons and change the time with the
CH+/CH-
buttons or by using the
NUMERIC
buttons.
Duration: Set the recording duration. The default recording duration
is 70 minutes. You can reduce or extend the duration of the
recording with the
LEFT
and
RIGHT
buttons respectively.
NOTE
After changing the date, start time or duration, pressing the
OK
button or moving to the next line will update the file name and end
time when applicable.