Beyonwiz FV-L1 Home Theater System User Manual


 
Advanced Setup
97
3) Firmware Upgrade OTA
You can upgrade your FV-L1 FW by OTA(Over The Air). Press the
OK
button for manual update.
Use the following options to configure the automatic upgrade process;
Allow system software updates: FV-L1 can get update software
through stream. The recommended setting is “Yes”.
Viewer prompt to update: The software update can be achieved with
interruption to the viewer. The recommended setting is “No”.
Time to search for SSU(System Software Updates): FV-L1 is on at the
predetermined time and may initiate a scan for firmware updates.
Before the upgrade get started, the warning message with countdown
for viewer response appears. If upgrade starts, FV-L1 checks available
updates in service list and a indication box will be displayed until this
process is completed.
NOTE
During upgrade, watching services, recording and file operations will
be stopped.
If there is no response from the viewer by the time countdown
completed, the procedure will start unless the viewer has chosen to
be prompted.