Information Commands
62
Table 42 RMON Alarm Information
Command Usage
rEvtIdx
Displays the rising alarm event index that is triggered when a rising threshold is crossed.
fEvtIdx
Displays the falling alarm event index that is triggered when a falling threshold is crossed.
Last value
Displays the last sampled value.
OID
Displays the MIB Object Identifier for each alarm index.
RMON event information
The following command displays RMON event information:
show rmon event
Command mode: All
RMON Event group configuration:
Index Type Last Sent Description
----- ---- ---------------- ---------------------------------
1 both 0D: 0H: 1M:20S Event_1
2 none 0D: 0H: 0M: 0S Event_2
3 log 0D: 0H: 0M: 0S Event_3
4 trap 0D: 0H: 0M: 0S Event_4
5 both 0D: 0H: 0M: 0S Log and trap event for Link Down
10 both 0D: 0H: 0M: 0S Log and trap event for Link Up
11 both 0D: 0H: 0M: 0S Send log and trap for icmpInMsg
15 both 0D: 0H: 0M: 0S Send log and trap for icmpInEchos
100 both 0D: 0H: 0M: 0S Event_100
The following table describes the RMON Event Information parameters.
Table 43 RMON Event Information
Command Usage
Index
Displays the index number that identifies each event instance.
Type
Displays the type of notification provided for this event, as follows: log, trap, both.
Last Sent
Displays the time that passed since the last switch reboot, when the most recent event was
triggered. This value is cleared when the switch reboots.
Description
Displays a text description of the event.
