Information Commands
53
Routing Information Protocol
The following table describes the Routing Information Protocol (RIP) information commands.
Table 35 RIP information commands
Command Usage
show ip rip routes
Displays RIP routes.
Command mode: All except User EXEC
show ip rip interface [<1-249>]
Displays RIP interface information.
Command mode: All except User EXEC
show interface ip rip
Displays RIP user’s configuration.
Command mode: All
RIP Routes information
The following command displays RIP route information:
show ip rip routes
Command mode: All except User EXEC
3.0.0.0/8 via 30.1.1.11 metric 4
4.0.0.0/16 via 30.1.1.11 metric 16
10.0.0.0/8 via 30.1.1.2 metric 3
20.0.0.0/8 via 30.1.1.2 metric 2
This table contains all dynamic routes learned through RIP, including the routes that are undergoing
garbage collection with metric = 16. This table does not contain directly connected routes and locally
configured static routes.
RIP user configuration
The following command displays RIP user information:
show interface ip [<1-250>] rip
Command mode: All
RIP USER CONFIGURATION :
RIP on update 30
RIP Interface 2 : 102.1.1.1, enabled
version 2, listen enabled, supply enabled, default none
poison disabled, trigg enabled, mcast enabled, metric 1
auth none, key none
RIP Interface 3 : 103.1.1.1, enabled
version 2, listen enabled, supply enabled, default none
poison disabled, trigg enabled, mcast enabled, metric 1
