ISCLI basics
16
The following table describes the ISCLI command modes.
Table 4 ISCLI Command Modes
Command Mode/Prompt Command used to enter or exit.
User EXEC
Switch>
Default mode, entered automatically
• exit—Exit
• logout—Exit
Privileged EXEC
Switch#
• enable—Enter Privileged EXEC mode, from User EXEC mode
• disable—Exit to User EXEC mode
• exit or logout—Quit ISCLI
Global configuration
Switch(config)#
• configure terminal—Enter Global Configuration mode, from
Privileged EXEC mode
• end or exit—Exit to Privileged EXEC mode
Interface port
Switch(config-if)#
• interface port <port number>—Enter Interface port mode, from
Global Configuration mode
• exit—Exit to Global Configuration mode
• end—Exit to Privileged EXEC mode
VLAN configuration
Switch(config-vlan)#
• vlan <1-4095>—Enter VLAN Configuration mode, from Global
Configuration mode
• exit—Exit to Global Configuration mode
• end—Exit to Privileged EXEC mode
Interface IP configuration
Switch(config-ip-if)#
• interface ip <1-250>—Enter Interface IP Configuration mode, from
Global Configuration mode
• exit—Exit to Global Configuration mode
• end—Exit to Privileged EXEC mode
