Configuration Commands
174
ACL Packet Format configuration
The following table describes the Packet Format Configuration commands.
Table 159 Packet Format Configuration commands
Command Description
access-control list <1-384>
packet-format ethernet
{ethertype2|snap|llc}
Defines the Ethernet format for the ACL.
Command mode: Global configuration
[no] access-control list
<1-384> packet-format tagged
Defines the tagging format for the ACL.
Command mode: Global configuration
default access-control list
<1-384> packet-format
Resets Packet Format parameters for the ACL to their default values.
Command mode: Global configuration
show access-control list
<1-384> packet-format
Displays the current Packet Format parameters for the ACL.
Command mode: All except User EXEC
ACL Metering configuration
The following table describes the ACL Metering Configuration commands.
Table 160 ACL Metering Configuration commands
Command Description
access-control list <1-384>
meter committed-rate
<1000-10000000>
Configures the committed rate, in Kilobits per second. The committed rate
must be a multiple of 1,000.
Command mode: Global configuration
access-control list <1-384>
meter maximum-burst-size
<32-4096>
Configures the maximum burst size, in Kilobits. Enter one of the following
values for mbsize: 32, 64, 128, 256, 512, 1024, 2048, 4096
Command mode: Global configuration
[no] access-control list
<1-384> meter enable
Enables or disables Metering on the ACL.
Command mode: Global configuration
access-control list <1-384>
meter action {drop|pass}
Configures the ACL Meter to either drop or pass out-of-profile traffic.
Command mode: Global configuration
default access-control list
<1-384> meter
Reset ACL Metering parameters to their default values.
Command mode: Global configuration
show access-control list
<1-384> meter
Displays the current ACL metering parameters.
Command mode: All except User EXEC
