Configuration Commands
150
Table 129 RIP Interface Configuration commands
Command Description
ip rip authentication key
{<password>}
Configures the authentication key password.
Command mode: Interface IP
ip rip enable
Enables this RIP interface.
Command mode: Interface IP
no ip rip enable
Disables this RIP interface.
Command mode: Interface IP
show interface ip [<1-250>] rip
Displays the current RIP configuration.
Command mode: All except User EXEC
RIP Route Redistribution configuration
The following table describes the RIP Route Redistribute commands.
Table 130 RIP Redistribute commands
Command Description
redistribute
{fixed|static|ospf|eospf} <1-32>
Adds selected routing maps to the RIP route redistribution list. This
option adds a route map to the route redistribution list. The routes of
the redistribution protocol matched by the route maps in the route
redistribution list will be redistributed.
Command mode: Router RIP
no redistribute
{fixed|static|ospf|eospf} <1-32>
Removes the route map from the RIP route redistribution list.
Command mode: Router RIP
redistribute
{fixed|static|ospf|eospf} export
metric <1-15>
Exports the routes of this protocol in which the metric and metric type
are specified. To remove a previous configuration and stop exporting
the routes of the protocol, enter none.
Command mode: Router RIP
show ip rip redistribute
Displays the current RIP route redistribute configuration.
Command mode: Router RIP
