Configuration Commands
160
IGMP static multicast router configuration
The following table describes the Static Multicast Router Configuration commands.
NOTE: When you configure a static multicast router on a VLAN, the process of learning multicast
routers is disabled for that VLAN.
Table 141 IGMP Static Multicast Router commands
Command Description
ip igmp mrouter <port number>
<1-4094> <1-3>
Selects a port/VLAN combination on which the static multicast router
is connected, and configures the IGMP version (1, 2, or 3) of the
multicast router.
Command mode: Global configuration
no ip igmp mrouter <port
number> <1-4094> <1-3>
Removes a static multicast router from the selected port/VLAN
combination.
Command mode: Global configuration
ip igmp mrouter portchannel
{<trunk number (1-12)>|<LACP
trunk (13-40>} <1-4094> <1-3>
Selects a trunk group/VLAN combination on which the static multicast
router is connected, and configures the IGMP version (1, 2, or 3) of
the multicast router.
Command mode: Global configuration
no ip igmp mrouter portchannel
{<trunk number (1-12)>|<LACP
trunk (13-40>} <1-4094> <1-3>
Selects a trunk group/VLAN combination on which the static multicast
router is connected, and configures the IGMP version (1, 2, or 3) of
the multicast router.
Command mode: Global configuration
show ip igmp mrouter
Displays the current IGMP Static Multicast Router parameters.
Command mode: All except User EXEC
IGMP filtering configuration
The following table describes the IGMP Filter Configuration commands.
Table 142 IGMP Filtering commands
Command Description
ip igmp profile <1-16>
Configures the IGMP filter.
Command mode: Global configuration
ip igmp filtering
Enables IGMP filtering globally.
Command mode: Global configuration
no ip igmp filtering
Disables IGMP Filtering globally.
Command mode: Global configuration
show ip igmp filtering
Displays the current IGMP Filtering parameters.
Command mode: All except User EXEC
