Configuration Commands
156
OSPF Host Entry configuration
The following table describes the OSPF Host Entry Configuration commands.
Table 136 OSPF Host Entry Configuration commands
Command Description
host <1-128> address <IP address>
Configures the base IP address for the host entry.
Command mode: Router OSPF
host <1-128> area <0-2>
Configures the area index of the host.
Command mode: Router OSPF
host <1-128> cost <1-65535>
Configures the cost value of the host.
Command mode: Router OSPF
host <1-128> enable
Enables OSPF host entry.
Command mode: Router OSPF
no host <1-128> enable
Disables OSPF host entry.
Command mode: Router OSPF
no host <1-128>
Deletes OSPF host entry.
Command mode: Router OSPF
show ip ospf host {<1-128>}
Displays the current OSPF host entries.
Command mode: All except User EXEC
OSPF Route Redistribution configuration
The following table describes the OSPF Route Redistribution Configuration commands.
Table 137 OSPF Route Redistribution Configuration commands
Command Description
redistribute {fixed|static|rip}
{<1-32>}
Adds selected routing maps to the rmap list.
This option adds a route map to the route redistribution list. The
routes of the redistribution protocol matched by the route maps
in the route redistribution list will be redistributed.
Command mode: Router OSPF
no redistribute {fixed|static|rip}
{<1-32>}
Removes the route map from the route redistribution list.
Removes routing maps from the rmap list.
Command mode: Router OSPF
[no] redistribute {fixed|static|rip}
export metric <1-16777214> metric-
type {type1|type2}
Exports the routes of this protocol as external OSPF AS-external
LSAs in which the metric and metric type are specified.
Command mode: Router OSPF
show ip ospf redistribute
Displays the current route map settings.
Command mode: All except User EXEC
