Information Commands
28
System information
The following command displays system information:
show sys-info
Command mode: All
System Information at 6:56:22 Thu Jan 11, 2007
Time zone: America/US/Pacific
HP 10 Gb Ethernet Blade Switch
sysName:
sysLocation:
RackId: Default RUID
RackName: Default Rack Name
EnclosureSerialNumber: -none-
EnclosureName: Default Chassis Name
BayNumber: 1
Switch has been up for 3 days, 14 hours, 56 minutes and 22 seconds.
Last boot: 17:25:38 Mon Jan 8, 2007 (software reset)
MAC address: 00:10:00:01:00:01 IP (If 1) address: 10.14.4.16
Revision:
Switch Serial No:
Hardware Part No: Spare Part No:
Software Version 1.0.0 (FLASH image2), active configuration.
System information includes:
• System date and time
• Switch model name and number
• HP c-Class Rack name and location
• Time of last boot
• MAC address of the switch management processor
• IP address of the switch
• Software image file and version number
• Current configuration block (active, backup, or factory default)
• Login banner, if one is configured
