A SERVICE OF

logo

Information Commands
54
IP information
The following command displays Layer 3 information:
show layer3 information
Command mode: All
IP information:
Interface information:
1: 10.80.23.243 255.255.254.0 10.80.23.255, vlan 1, up
250: 10.20.7.144 255.255.0.0 10.20.255.255, vlan 4095, up
Default gateway information: metric strict
1: 10.80.22.1, vlan any, up active
254: 10.20.1.1, vlan 4095, up active
Current BOOTP relay settings: OFF
0.0.0.0, 0.0.0.0
Current IP forwarding settings: OFF, dirbr disabled
Current network filter settings:
none
Current route map settings:
The following interface and default gateway information is displayed:
Interface number
IP address
IP mask
IP broadcast address
Operational status