Configuration Commands
115
Table 86 View-based Access Control Configuration commands
Command Description
snmp-server access <1-32> level
{noAuthNoPriv|authNo-
Priv|authPriv}
Defines the minimum level of security required to gain access rights.
The level noAuthNoPriv means that the SNMP message will be
sent without authentication and without using a privacy protocol.
The level authNoPriv means that the SNMP message will be sent
with authentication but without using a privacy protocol. The
authPriv means that the SNMP message will be sent both with
authentication and using a privacy protocol.
Command mode: Global configuration
snmp-server access <1-32> read-
view <1-32 characters>
Defines a 32 character long read view name that allows you read
access to a particular MIB view. If the value is empty or if there is no
active MIB view having this value then no access is granted.
Command mode: Global configuration
snmp-server access <1-32> write-
view <1-32 characters>
Defines a 32 character long write view name that allows you write
access to the MIB view. If the value is empty or if there is no active
MIB view having this value then no access is granted.
Command mode: Global configuration
snmp-server access <1-32> notify-
view <1-32 characters>
Defines a 32 character long notify view name that allows you notify
access to the MIB view.
Command mode: Global configuration
no snmp-server access <1-32>
Deletes the View-based Access Control entry.
Command mode: Global configuration
show snmp-server access <1-32>
Displays the View-based Access Control configuration.
Command mode: All
SNMPv3 Group configuration
The following table describes the SNMPv3 Group Configuration commands.
Table 87 SNMPv3 Group Configuration commands
Command Description
snmp-server group <1-16>
security {usm|snmpv1|snmpv2}
Defines the security model.
Command mode: Global configuration
snmp-server group <1-16>
user-name <1-32 characters>
Sets the user name. The user name can have a maximum of
32 characters.
Command mode: Global configuration
snmp-server group <1-16>
group-name <1-32 characters>
The name for the access group. The group name can have a maximum of
32 characters.
Command mode: Global configuration
no snmp-server group <1-16>
Deletes the vacmSecurityToGroup entry.
Command mode: Global configuration
