Configuration Commands
175
ACL Re-mark configuration
You can choose to re-mark IP header data for the selected ACL. You can configure different re-mark
values, based on whether packets fall within the ACL Metering profile, or out of the ACL Metering profile.
The following table describes the ACL Re-mark Configuration commands.
Table 161 ACL Re-mark Configuration commands
Command Description
[no] access-control list <1-384>
re-mark
Assign an ACL for DSCP Re-marking.
Command mode: Global configuration
default access-control list <1-384>
re-mark
Reset ACL Re-mark parameters to their default values.
Command mode: Global configuration
show access-control list <1-384>
re-mark
Displays the current ACL re-mark parameters.
Command mode: All except User EXEC
ACL Re-mark In-Profile configuration
The following table describes the ACL Re-mark In-Profile Configuration commands.
Table 162 ACL Re-mark In-Profile Configuration commands
Command Description
access-control list <1-384>
re-mark in-profile dscp <0-63>
Sets the DiffServ Code Point (DSCP) of In-Profile packets to the
selected value.
Command mode: Global configuration
default access-control list
<1-384> re-mark
Resets the update DSCP parameters to their default values.
Command mode: Global configuration
show access-control list <1-384>
re-mark
Displays the current ACL re-mark parameters.
Command mode: All except User EXEC
