Configuration Commands
123
Port configuration
Use the port configuration commands to configure settings for individual switch ports.
NOTE: Port 17 is reserved for switch management.
The following table describes the Port Configuration commands. The following sections provide more
detailed information and commands.
Table 97 Port Configuration commands
Command Description
interface port {<port
number>}
Enter Interface Port configuration mode for the selected port.
Command mode: Global configuration
dot1p <0-7>
Configures the port’s 802.1p priority level.
Command mode: Interface port
pvid {<1-4094>}
Sets the default VLAN number which will be used to forward frames which
are not VLAN tagged. The default number is 1.
NOTE: VLAN 4095 is reserved for switch management.
Command mode: Interface port
name {<1-64 characters>}
Sets a name for the port (maximum 64 characters). The assigned port name
displays next to the port number on some information and statistics screens.
Command mode: Interface port
[no] rmon
Enables or disables Remote Monitoring for the port. RMON must be
enabled for any RMON configurations to function.
Command mode: Interface port
[no] tagging
Disables or enables VLAN tagging for this port. It is disabled by default.
Command mode: Interface port
[no] tag-pvid
Disables or enables VLAN tag persistence. When disabled, the VLAN tag is
removed from packets whose VLAN tag matches the port PVID. The default
value is enabled.
Command mode: Interface port
broadcast-threshold
{<0-262143>}
Limits the number of broadcast packets per second to the specified value. If
disabled (dis), the port forwards all broadcast packets.
Command mode: Interface port
multicast-threshold
{<0-262143>}
Limits the number of multicast packets per second to the specified value. If
disabled (dis), the port forwards all multicast packets.
Command mode: Interface port
dest-lookup-threshold
{<0-262143>}
Limits the number of unknown unicast packets per second to the specified
value. If disabled (dis), the port forwards all unknown unicast packets.
Command mode: Interface port
no shutdown
Enables the port.
Command mode: Interface port
