Configuration Commands
125
Table 98 Gigabit Link Configuration commands
Command Description
no flowcontrol
Sets the flow control to none.
Command mode: Interface port
[no] auto
Enables or disables auto-negotiation for the port.
All downlink and uplink ports are fixed at 10000 Mbps, and cannot be
set to auto-negotiate.
Command mode: Interface port
show interface port
{<port number>}
Displays current port parameters.
Command mode: All
ACL Port configuration
The following table describes the basic Access Control List Configuration commands for the port.
Table 99 ACL Port Configuration commands
Command Description
[no] access-control list <1-384>
Adds or removes the specified ACL.
Command mode: Interface port
[no] access-control group <1-384>
Adds or removes the specified ACL Group.
Command mode: Interface port
show interface port [<port number>]
access-control
Displays current ACL QoS parameters.
Command mode: All
