Filter
Top Products
Operating the MD Deck Using a Keyboard
50
GB
Naming a Track or MD
Using the Keyboard
If you use a keyboard, you can quickly enter or edit
names. While editing a name, you can move the cursor in
jumps or scroll the name.
Short cut to the naming procedure
1 Press [Num Lock] while the deck is in one of the
operating statuses listed below, depending on
what you want to name:
To name Press while the deck is
A track Playing, paused, recording, or stopped
with the track number displayed
The MD Stopped with no track number displayed
A flashing cursor appears in the display.
2 Enter a name.
Besides letter keys, you can also use the keys shown in
the following table.
3 Press [Enter] or [Num Lock].
The whole name appears in the display.
Operations you may want to do while naming a
track or MD
To Press
Cancel the operation [Esc]
Switch between uppercase and
lowercase letters
[Caps Lock] or [Shift]
*
Move the cursor [T] or [t]
Jump the cursor to the top of the name [Home]
Jump the cursor to the end of the name [End]
Scroll the name [Page Up] or
[Page Down]
Erase the character at the cursor
position
[Delete]
Erase the character preceding the
cursor
[Back Space]
*
If you have assigned characters to keys using [Shift] (see page 52),
the characters you assigned have priority.
z You can undo the naming of a track or MD
1 Press [F11].
“Name Undo?” appears.
2 Press [Enter].
Press [Esc] to cancel the operation.
Using the Edit Menu
1 Press [Esc] while the deck is in one of the operating
statuses listed below, depending on what you
want to name:
To name Press while the deck is
A track or the MD Stopped, playing, or paused
The track being recorded Recording the track
“Edit Menu” appears in the display.
2 Press [R]/[r] or [Tab]/[Shift]+[Tab] repeatedly until
“Name ?” appears, then press [Enter].
While the deck is recording, a flashing cursor appears
in the display and you can enter a name for the track
being recorded. In this case, go to step 5.
3 Press [R]/[r] or [Tab]/[Shift]+[Tab] repeatedly until
“Nm In ?” appears, then press [Enter].
4 Press [R]/[r] or [Tab]/[Shift]+[Tab] repeatedly until
the track number (when naming a track) or “Disc”
(when naming the MD) flashes, then press [Enter].
A flashing cursor appears.
5 Enter a name.
6 Press [Enter] or [Num Lock].
The whole name appears in the display.