Filter
Top Products
26
GB
Playing MDs
This chapter explains the various
ways to play MDs.
Playing an MD
The operations for normal play are explained below.
A
AMS
XxH
`/1
EJECT A
1 Turn on the amplifier and select MD on the
amplifier.
2 Press ~/1 to turn on the deck.
The STANDBY indicator turns off.
3 Insert an MD.
4 If necessary, turn AMS clockwise (or press >
repeatedly) to locate the track you want to start
playing from.
If you want to play from the first track, go to step 5.
5 Press H.
The deck starts to play.
6 Adjust the volume on the amplifier.
Operations you may want to do during play
To Press or turn
Stop play x
Pause play X
Resume play after pausing H or X
Locate a succeeding track AMS clockwise (or press >
repeatedly)
Locate the beginning of the
current track or a preceding
track
AMS counterclockwise (or press
. repeatedly)
Eject the MD EJECT A after stopping play
Adjust the analog output
level* (between –20.0 dB and
0.0 dB) Z
REC LEVEL/ANALOG OUT
LEVEL +/– repeatedly
*
When you eject the MD or turn off the deck, the output level is reset
to the factory setting (0.0 dB).
z
To use headphones
Connect them to PHONES jack. Turn PHONE LEVEL (or press
REC LEVEL/ANALOG OUT LEVEL +/– repeatedly) to adjust
the volume.