Filter
Top Products
5
GB
Getting Started
Hooking Up the Audio Components
Mains lead
White (L) White (L)
Red (R) Red (R)
Amplifier,
etc.
CONTROL A1
CD player, DBS tuner*, Digital
amplifier, DAT deck, MD deck, etc.**
*
Digital equipment with a DIGITAL OUT connector only
**
Digital equipment with both DIGITAL IN and OUT connectors
Required cords
Audio connecting cords (2) (supplied)
When connecting an audio connecting cord, be sure to match the
colour-coded pins to the appropriate jacks: white (left) to white
and red (right) to red.
Optical cables (3) (only one supplied)
• When connecting an optical cable, take the caps off the
connectors and insert the cable plugs straight in until they click
into place.
• Do not bend or tie the optical cables.
Coaxial digital connecting cables (2) (not supplied)
Things you should keep in mind while
hooking up the system
• Turn off the power to all components before making
any connections.
• Do not connect any mains lead until all the connections
are completed.
• Be sure the connections are firm to prevent hum and
noise.
Jacks (connectors) for connecting audio
components
Connect To the
Amplifiers LINE (ANALOG) IN/OUT jacks
CD players or DBS tuners DIGITAL COAXIAL IN jack or
DIGITAL OPTICAL IN
*
connector
Digital amplifiers, DAT decks,
or another MD deck
DIGITAL COAXIAL IN/OUT
jacks or DIGITAL OPTICAL IN
*/
OUT connectors
*
There is no distinction of IN1 and IN2 connectors.