Filter
Top Products
Editing Recorded MDs
36
GB
5 Repeat step 4 until you’ve located point A.
6 Press AMS or YES to enter point A.
“Point B set” appears and several seconds of the track
from point A play back r epeatedly .
7 Continue playing the track or press M to locate
the ending point of the portion to be erased (point
B), then press AMS or YES.
“A-B Ers” and “Point B ok?” alternate in the display
and a few seconds of the track befor e point A and after
point B play back r epeatedly .
8 Repeat step 4 until you’ve located point B.
9 Press AMS or YES to enter point B.
“Complete!!” appears for a few seconds and the
portion between point A and B is erased.
To cancel the operation
Press MENU/NO or x.
z
You can undo the erasure
For details, see “Undoing the Last Edit” on page 42.
Note
In the following cases, “Impossible” appears and you can’t erase
a portion of a track:
• The point B you entered comes before point A.
• After repeated editing of a track, it may become impossible to
erase a portion of the track any further. This is a technical
limitation of the MD system and is not a mechanical error.
Dividing Tracks
You can divide a r ecorded track at any point simply by
adding a track mark at that point. This is especially useful
when you want to divide r ecorded material which
contains multiple tracks but only one track number (see
page 23), or when you want to locate a certain point in the
track.
Example: Dividing the second track
AAA
B1 B2
CCC
1 2 3
AAA
BBB
BBB
B1 B2
CCC
1 2 3 4
When you divide a track, the total number of tracks
increases by one and all tracks following the divided track
are automatically r enumber ed.
Dividing a track after selecting the track
1 While the deck is stopped, playing, or paused,
press MENU/NO.
“Edit Menu” appears in the display .
2 Turn AMS (or press ./> repeatedly) until
“Divide ?” appears, then press AMS or YES.
3 Turn AMS (or press ./> repeatedly) until the
number of the track you want to divide appears,
then press AMS or YES.
“-Rehearsal-” appears and the track star ts to play .
4 While monitoring the sound, turn AMS (or press
./> repeatedly) to locate the dividing point.
The time indication (“m,” “s ,” and “f ”) of the cur rent
point is displayed and several seconds of the track
from that point play back r epeatedly .
To find a point quickly
Specify a unit (minute, second, or frame) by which the
MD is advanced when you tur n AMS (or press ./
> repeatedly).
To do this, pr ess m/M in step 4 r epeatedly to select
“m,” “s ,” or “f .” The selected unit flashes in the
display.
Erasing Tracks