Filter
Top Products
Editing Recorded MDs
37
GB
5 Repeat step 4 until you’ve located the dividing
point.
6 Press AMS or YES.
“Complete!!” appears for a few seconds and the track
is divided. The deck star ts to play the newly cr eated
track. Note that new track has no name.
To cancel the operation
Press MENU/NO or x.
z
You can undo the track division
For details, see “Undoing the Last Edit” on page 42.
z
You can divide tracks while recording
For details, see “Marking Track Numbers While Recording” on
page 22.
Dividing a track after selecting the
dividing point
1 While the deck is playing, press AMS at the point
you want to divide the track.
“- Divide -” and “-Rehearsal-” alternate in the display
and the deck star ts to play fr om the selected point.
2 If necessary, do step 4 of “Dividing a track after
selecting the track” on page 36 to finely adjust the
dividing point.
3 Press YES.
“Complete!!” appears for a few seconds and the track
is divided. The deck star ts to play the newly cr eated
track. Note that new track has no name.
To cancel the operation
Press MENU/NO or x.
z
You can undo the track division
For details, see “Undoing the Last Edit” on page 42.
z
You can divide tracks while recording
For details, see “Marking Track Numbers While Recording” on
page 22.
Combining Tracks
This function allows you to combine any two tracks into a
single track. The two tracks need not to be consecutive
nor chronological. Y ou can combine several tracks into a
single medley , or several independently r ecor ded por tions
into a single track. When you combine two tracks, the
total number of tracks decr eases by one and all tracks
following the combined track ar e renumber ed.
Example: Combining the second track and the
fourth track
AAA BBB
BBB
DDD
CCC
1 2 3
AAA BBB DDDCCC
1 2 43
If both of the combined tracks have a track name, the
name of the second track is erased.
1 While the deck is stopped, playing, or paused,
press MENU/NO.
“Edit Menu” appears in the display .
2 Turn AMS (or press ./> repeatedly) until
“Combine ?” appears, then press AMS or YES.
3 Turn AMS (or press ./> repeatedly) until the
number of the first track of the two to be
combined appears, then press AMS or YES.
The display for selecting a second track appears and
the deck plays the por tion wher e joining will occur
(the end of the first track and the beginning of the
track following it) r epeatedly .
4 Turn AMS (or press ./> repeatedly) until the
number of the second track of the two to be
combined appears, then press AMS or YES.
“Complete!!” appears for a few seconds and the tracks
are combined. The deck star ts to play the combined
track.
To cancel the operation
Press MENU/NO or x.
z
You can undo the combination
For details, see “Undoing the Last Edit” on page 42.
Note
If “Impossible” appears in the display, the tracks can’t be
combined because repeated editing has been done to the track(s).
This is a technical limitation of the MD system and is not a
mechanical error.