Filter
Top Products
Other Functions
44
GB
Finely controlling the pitch (Fine Control
Function)
You can fine control the playback speed in 0.1%
increments from –98.5% to +12.5%.
1 While the deck is playing, press PITCH CONTROL
repeatedly until “Pfine” appears in the display.
2 Turn AMS until the desired value appears.
To recall the factory setting
Press CLEAR while setting the value.
z
You can use Setup Menu to change the pitch
During play, select “Pitch” to set the pitch automatically in steps
or “Pfine” to finely control the pitch.
Notes
• When you change the fine control value, the playback sound
drops out momentarily.
• The fine control value reverts to “0.0%” (factory setting) when
you turn off the deck or eject the MD.
• The step and fine control values are linked; changing one value
also changes the other.
Fade In and Fade Out Z
You can use Fade-in Play to gradually increase the signal
level to the LINE (ANALOG) OUT jacks and the PHONES
jack at the start of playback. Fade-out Play gradually
decreases the signal level at the end of playback.
Fade-in Recording gradually increases the signal level at
the start of recording. Fade-out Recording gradually
decreases the signal level at the end of recording.
FADER
>.X
H
X
` / 1
Z
x
.>
mM
Note
The signal level output to the DIGITAL OUT connector does not
change during Fade-in Play nor Fade-out Play.
Fade-in Play and Fade-in Recording
During play pause (for Fade-in Play) or recording
pause (for Fade-in Recording), press FADER.
b flashes in the display and the deck performs Fade-in
Play or Fade-in Recording for five seconds (factory
setting) until the counter reaches “0.0s.”
Changing the Pitch (Pitch Control Function)