Filter
Top Products
Playing MDs
30
GB
Creating Your Own
Programme (Programme Play)
You can pick out the tracks that you like and specify the
playback order in a programme containing up to 25
tracks.
A
AMS
YESMENU/NO
DISPLAY/CHAR
PLAY MODE
H
m/M
CLEAR
MENU/NO
YES
DISPLAY
PROGRAM
>25
H
./>
m/M
CLEAR
>.X
H
X
` / 1
Z
x
z
.
>
m
M
To enter a track number over 25 Z
Use >25. For details, see page 27.
To check the total playing time of the programme
Press DISPLAY/CHAR (or DISPLAY).
4 Repeat step 3 to enter other tracks.
The entered track is added to the location where the
“0” flashes.
Each time you enter a track, the total programme time
appears in the display.
5 Press YES.
“Complete!!” appears and the programme is
completed.
6 Press PLAY MODE repeatedly (or PROGRAM once)
until “PROGRAM” lights up in the display.
7 Press H.
Programme Play starts.
To stop Programme Play
Press x.
To resume normal play
Press PLAY MODE repeatedly (or CONTINUE once) until
“PROGRAM” turns off.
z
The programme remains even after Programme Play ends or
is stopped
Press H to play the programme again.
Notes
• If you turn off the deck or disconnect the mains lead, the
programme will be lost.
• The display shows “- - - m - - s” when the total playing time of
the programme exceeds 199 minutes.
• “ProgramFull!” appears when you try to programme the 26th
track.
Checking the contents of the programme
While the deck is stopped and “PROGRAM” lights up,
press DISPLAY/CHAR (or DISPLAY) repeatedly.
The first several tracks in the programme appear in the
display. To see the rest of the programme, turn AMS (or
press ./> repeatedly).
Number
buttons
Programming the tracks
1 While the deck is stopped, press MENU/NO twice.
“Setup Menu” appears in the display.
2 Turn AMS (or press ./> repeatedly) until
“Program ?” appears, then press AMS or YES.
3 Turn AMS (or press ./> repeatedly) until the
track number you want to add to the programme
appears, then press AMS or M (or use the number
button(s) to enter the track directly).
If you entered the wrong track number
Press m/M repeatedly until the wrong track
number flashes, then do step 3 above again or press
CLEAR to erase the track number. If “0” flashes, press
m.