Filter
Top Products
15
GB
Location and Function of Parts
Press
z
The Peak Hold Function freezes the peak level meters at the
highest level reached by the input signal
1 While the deck is stopped or playing, press MENU/NO twice.
“Setup Menu” appears in the display.
2 Turn AMS until “P.Hold Off” (factory setting) appears, then
press AMS or YES.
3 Turn AMS to select “P.Hold On,” then press AMS or YES.
4 Press MENU/NO.
To turn off the Peak Hold Function, select “P.Hold Off” in step 3
above.
z
You can use the remote to turn the Peak Hold Function on or
off Z
Press P.HOLD to display “P.Hold On” or “P.Hold Off.”
While the deck is playing
Press DISPLAY/CHAR (or DISPLAY) repeatedly to
change the display.
Each press of the button changes the display as follows:
Track number and elapsed time of the
current track (default display)
Press
The contents of a programme (only when
“PROGRAM” lights up)
Press
Disc name and track name
Press
DF (digital filter) display
While the deck is recording
Press DISPLAY/CHAR (or DISPLAY) repeatedly to
change the display.
Each press of the button changes the display as follows:
Track number and recorded time of the
current track (default display)
Press
Level of the input signal
Press
Sampling frequency indication
*
Press
*
“FS -- kHz” appears while the analog signal is input.
z
You can check the remaining recordable time on the MD
Press TIME. Each press of the button changes the display as
follows:
Track number and recorded time of the
current track (default display)
Press
Track number and remaining recordable
time on the MD
Level of the output signal
Press
Press
Press
DF (digital filter) display