Filter
Top Products
25
GB
Recording on MDs
Operations you may want to do during CD
Synchro-recording
To Press
Stop recording CD-SYNC STOP
Pause recording CD-SYNC STANDBY or CD
PLAYER X
Locate the next track to be
recorded during recording
pause
CD PLAYER ./>
Resume recording after
pausing
CD-SYNC START or CD
PLAYER X
Check the remaining
recordable time on the MD
TIME (page 15)
z
You can use the remote of the CD player during CD Synchro-
recording
Press To change the deck to And change the CD player to
H Recording Play
x Recording pause Stop
X Recording pause Pause
z
During CD Synchro-recording, track numbers are marked in
the following ways:
• When the CD player is connected to the DIGITAL IN connector,
track numbers are automatically marked as they appear on the
CD.
• When the CD player is connected to the LINE (ANALOG) IN
jacks, track numbers are automatically marked when “T.Mark
Lsyn” has been selected (page 22).
• When you resume recording after recording pause, a new track
number is automatically marked, regardless of the track
marking parameter setting (“T.Mark Lsyn” or “T.Mark Off”).
z
You can change CDs during CD Synchro-recording
1 Press x on the CD player’s remote.
2 Change the CD.
3 Press H on the CD player’s remote.
Recording resumes.
z
You can also perform synchro-recording with a Sony video
CD player
By reprogramming the MD’s remote, you can use the procedure
above to perform synchro-recording with a Sony video CD
player.
Press number button 2 while pressing down ~/1 on the MD
deck’s remote. You can now operate the MD deck and the video
CD player with the remote. To control the CD player again, press
number button 2 while pressing down ~/1 on the MD deck’s
remote.
z
During CD Synchro-recording, the deck copies CD text
information (CD text and disc memos) as it is to the MD (Disc
Memo Copy function)
The Disc Memo Copy function operates when you make a CD
Synchro-recording from a Sony CD player connected with a
control A1 cable (not supplied) to the MD deck.
Notes
• When performing CD Synchro-recording with a CD player
with a mode selector, be sure to set the selector to CD1.
• When you record tracks from certain CD or multi-disc players,
the entire material may be recorded as a single track.
• The Disc Memo Copy function may not operate for extremely
short CD tracks.
• Text information may not be copied for some CDs.
Making a CD Synchro-recording from a
Sony CD player connected with a control
A1 cable (not supplied)
1 Do steps 1 to 3 of “Synchro-recording With a Sony
CD Player” on page 24.
2 Set the CD player to playback pause mode.
3 Press REC z on the deck.
The MD deck changes to recording pause.
4 Press H or X on the deck.
The deck starts recording and the CD player starts to
play. When CD play finishes, recording stops.