Filter
Top Products
68
Timer recording radio
programs
To timer record, you must first preset the radio
station (see page 7) and set the clock (see page 6).
x
.
>
N
`/1
X
M
m
3,4,6
3,4,6
3,4,6
8
2
1 Tune in the preset radio station (see
page 18).
2 Press CLOCK/TIMER SET.
“SET DAILY” appears.
3 Press . or > to select either “MD
REC” or “TAPE REC”, then press
ENTER/YES.
“ON” lights up, and the hour indication
flashes.
4 Set the time to start recording.
Press . or > repeatedly to set the hour,
then press ENTER/YES.
The minute indication flashes.
Press . or > repeatedly to set the
minute, then press ENTER/YES.
The hour indication flashes again.
5 Set the time to stop recording following
the procedure in step 4.
6 When you record onto an MD, select
STEREO or MONO by pressing .
or >, then press ENTER/YES.
The timer recording settings appear, then the
original display returns.
7 Insert a recordable MD or tape.
If you use a partially recorded MD, recording
starts after the recorded tracks.
If you use a tape, recording starts from the
front side. Insert a tape with the side you
want to record on facing you.
8 Press ?/1 to turn off the system.