Filter
Top Products
15
Basic Operations
Playing a tape
You can use any type of tape, TYPE I (normal),
TYPE II (CrO2) or TYPE IV (metal), since the
tape deck automatically detects the tape type
(ATS*).
To turn on the system, press ?/1 (power).
?/1 (power)
Tips
• Pressing MD NX when the system is off
automatically turns on the system and starts MD
play if there is an MD in the system (One Touch
Play).
• You can switch from another source to the MD
deck and start playing an MD just by pressing MD
NX (Automatic Source Selection).
• You can start playing from the desired track in
step 2.
1 Press . or > repeatedly until the desired
track appears.
2 Press MD NX.
Or, press the number buttons on the remote.
The playback automatically starts. To enter track
numbers 10 or over, press >10 (press twice to enter
100 or over) and the track number. To enter 0, use
the 10/0 button.
Note
Do not use an MD on which the label sticks out from
the edge or on which the label is not positioned
correctly. Such labels can cause the MD deck to
malfunction.
4
m/M
VOLUME
TAPEx
2
3
1
DOLBY
NR**
TAPEX
* ATS: Automatic Tape Selection
**This tape deck is equipped with the Dolby B-type
noise reduction system.
1 Press TAPE Z and insert a recorded
tape.
With the side you want to
play facing you
continued