Filter
Top Products
52
Dividing recorded tracks
— Divide Function
You can use this function to mark track numbers
after recording. The total number of tracks
increases by one and all the tracks following the
divided ones are renumbered.
Example: Dividing track 2 into two tracks.
12 3
123 4
A
AB C D
CBD
1Press MD to switch the function to MD.
2 Press MENU/NO to display “Edit
Menu.”
3 Press . or > repeatedly until
“Divide ?” appears, then press ENTER/
YES.
4 Press . or > repeatedly until the
desired track number to divide appears,
then press ENTER/YES.
“—Rehearsal—” appears and the portion to
be divided is played repeatedly.
5 While monitoring the sound, press .
or > repeatedly to adjust the point to
be divided.
You can shift the point by 1/86 second
(1 frame) intervals.
To shift the point by second or minute
intervals, press m or M so that second or
minute flashes, then press . or >.
6 Press ENTER/YES.
“Complete !!” appears for a few seconds and
the newly created track starts playing.
To cancel dividing
Press MENU/NO.
To return to the condition before
DIVIDE
You can return to the original condition
immediately after dividing the tracks by using
Undo Function on page 55. You can also return to
the original condition by using Combine Function
on page 53.
Track
number
Original
tracks
After
DIVIDE
Divide track 2 into
track B and C
x
.
>
N
`/1
X
M
m
2
3,4,5
1
3,4,6
3,4,5