Filter
Top Products
41
The MD Deck — Recording
Adjusting the recording
level
When recording on an MD, you can adjust the
recording level to the desired volume. You can
adjust the recording level not only when making
an analog recording, but also when making a
digital recording from a CD, etc.
2
x
.
>
N
`/1
X
M
m
3,8 4,5,7
4,5,6
4,5,6
9
1 Prepare the desired sound source to
record and start play.
2 Confirm that the MD deck is in
recording standby.
If not, press MD REC z.
3 Press MENU/NO on the remote.
4 Press . or > on the remote
repeatedly until “Setup ?” appears, then
press ENTER/YES on the remote.
5 Press . or > repeatedly until
“LevelAdjust?” appears, then press
ENTER/YES.
6 Press . or > to adjust the
recording level.
The recording level can be adjusted from –12
to +12. While monitoring the sound, adjust
to the optimum level while making sure that
“OVER” does not appear in the display at the
loudest portion. The level meter appears in
the display while adjusting the level. (The
left channel is on the top, and the right
channel is on the bottom.)
Adjust the level not to
appear “OVER”
continued