Filter
Top Products
21
Basic Operations
Recording on a tape
You can use TYPE I (normal) or TYPE II (CrO2)
tape. The recording level is automatically
adjusted.
To turn on the system, press ?/1 (power).
?/1 (power)
2 Press TUNER/BAND to select “FM” or
“AM.”
3 Press TUNING MODE repeatedly until
“PRESET” appears.
4 Press TUNING + or – to select the
desired preset station.
The preset number scrolls in the display,
followed by the frequency.
Frequency (or station name* or RDS station
name**)
When you preset only one station, “ONE
PRESET” appears in the display.
You can also select the preset numbers with
the number buttons on the remote.
* The station name appears only if you have
labeled the station (see page 63).
**European model only
5 Press TAPE REC z.
The tape deck stands by for recording and
“REC” appears in the display.
6 Press DIRECTION repeatedly until g
appears to record on one side or h (or
j) to record on both sides.
7 Press TAPE X.
Recording starts.
continued
5 TAPEx
3,6
1
DOLBY NR*
7 TAPEnN
4
2
* This tape deck is equipped with the Dolby B-type
noise reduction system.
1 Press TAPE Z and insert a blank tape.
With the side you want to
record on facing you