Filter
Top Products
12
Recording a CD on an MD or a
tape (continued)
Recording on a tape
You can use TYPE I (normal) or TYPE II (CrO2)
tape. The recording level is automatically
adjusted.
?/1 (power)
TAPEnN
2,3
CDx
TAPEx
5,7 6
14
DOLBY
NR*
* This tape deck is equipped with the Dolby B-type
noise reduction system.
1 Press TAPE Z and insert a blank tape.
With the side you want to
record on facing you
2 Press CD Z and place a CD on the disc
tray.
With the label
side up. When
you play a CD
single (8 cm
CD), place it on
the inner circle
of the tray.
3 Press CD Z to close the disc tray.
4 Press SYNCHRO REC repeatedly until
“CD-TAPE SYNC” appears.
5 Press ENTER/START.
The tape deck stands by for recording and
the CD player pauses for play.
6 Press DIRECTION repeatedly until g
appears to record on one side or h (or
j) to record on both sides.
7 Press ENTER/START.
Recording starts.
When the recording is completed, the CD
player and the tape deck stop automatically.
To stop recording
Press CD x or TAPE x.