Filter
Top Products
43
The MD Deck — Recording
1 Press MD on the remote to switch the
function to MD.
2 Press MENU/NO on the remote in stop
mode.
3 Press . or > on the remote
repeatedly until “Setup ?” appears, then
press ENTER/YES on the remote.
4 Press . or > repeatedly until
“Stereo Rec” (or “Mono Rec”) appears,
then press ENTER/YES.
5 Press . or > repeatedly until
“Mono Rec” appears, then press
ENTER/YES.
“MONO” lights up.
6 Press FUNCTION repeatedly to select
the desired source (e.g., TUNER) to
record.
7 Press MD REC z.
The MD deck stands by for recording.
8 Press MD NX.
Recording starts.
The sound source is heard as is (e.g., stereo
sound when recording a stereo broadcast)
from the speakers.
To stop recording
Press MD x.
To return to stereo recording
1 Press MENU/NO on the remote when MD
function is in stop mode.
2 Press . or > on the remote repeatedly
until “Setup ?” appears, then press ENTER/
YES on the remote.
3 Press . or > repeatedly until “Mono
Rec” appears, then press ENTER/YES.
4 Press . or > repeatedly until “Stereo
Rec” appears, then press ENTER/YES.
The system switches back to stereo recording,
and “MONO” lights off.