Filter
Top Products
36
Starting recording with
6 seconds of prestored audio
data (continued)
.
>
`/1
M
m
5
1 Insert a recordable MD.
2 Press FUNCTION repeatedly to select
the desired source (i.e., TUNER) to
record.
3 Press MD REC z.
The MD deck stands by for recording.
4 Start playing the desired source to
record.
5 Press ENTER/YES on the remote at the
desired point to start recording.
Recording of the source starts with the
6 seconds of audio data stored in the buffer
memory.
If you use a partially recorded MD, recording
starts after the recorded tracks.
To stop Time Machine Recording
Press MD x.
Before pulling out the power
cord
MD recording is completed when the MD Table
of Contents (TOC) is updated. The TOC is
updated when you eject the MD or press ?/1 to
turn off the system. Do not pull out the power cord
before updating the TOC (while “TOC” is lit) or
while updating the TOC (while “TOC” or
“STANDBY” is flashing) to ensure a complete
recording.
Note
The MD deck starts storing audio data when the deck
stands by for recording in step 3 and you start playing
the source. If less than 6 seconds have passed when
you press ENTER/YES on the remote, Time Machine
Recording starts with less than 6 seconds of audio
data.