Filter
Top Products
Error message
LoBATT
MEMORY
NO CHG
NoCOPY
NoDISC
NoEDIT
NoMARK
NO OPR
No SIG
PbONLY
Rd ERR
Meaning/Remedy
• Battery is weak.
•'_ Replace lbe dry battery (page 18).
• You tried to record with the recorder placed where it receives
continuous vibr3tion.
Put the recorder on a stable place, and start recording again.
• You tried to charge at a place where the temperature is too high.
Charge the battery at a temperature of +5°C (+41°F) to +40°C
(+I04°F).
• You tried m make a copy from a disc that is protected by the Serial
Copy Management System. You cannot moke copies from a
digitally connected source which was itself recorded using digital
connection.
•'_ Use analog connection inste3d (page 32).
• You tried to play or record with no disc in the recorder.
insert an MD.
• You selected "G : Ers" with a disc without group setting.
You cannot erase groups with a disc with no groups.
• You selected, "G : Set", "G : Rls", "Move", or "Erase" while
recording.
• You tried to erase the track mark at the beginning of the first track
or group.
• You tried to erase a track mark to combine tracks the recorder
cannot combine (a track recorded in stereo and in mono, lbr
example).
• You tried to overwrite a track marks.
• You selected bookmork play without setting bookmarks.
•'_ Set bookmarks (page 57).
• You tried to set Auto Time Mark while recording through digital
connection.
• You tried to press || or T MARK during synchro-recording.
• The recorder could not detect digital input signals.
•,_ Make sure that the source is connected firmly (page 23).
• You tried to record or edit on a pre mastered MD (Pb stands lbr
"playback").
insert a recordable MD.
• The recorder cannot read the disc information correctly.
•'_ Reinsert the disc.
79