Filter
Top Products
If your computer does not recognize the Net MD
• Is the Net MD connected correctly to your computer?
if the Net MD is not llrmly connecled to the computer, the Net MD will not be
recognized by your computer.
Reconnect the dedicated USB cable. If the computer still does not recognize the NeI
MD, disconnect lhe Net MD, restart 1he compuler, and connect 1he dedicated USB
cable again.
• IS an MD inserted in the Net MD?
Check if an MD is inserted in the Net MD.
• If your computer does not recognize your Net MD even when the Net MD is
connected end a disc is inserted, the Net MD driver may not be correctly
installed.
Go to the [USB Controller] in the Windows Device Manager window to verify th3t your
Net MD is correctly recognized.
A [!] mark in lhe Device Manager window indicales 1hat your Net MD is not correctly
recognized. Reinstall the Net MD driver.
t Click [Start]-[Settingsl-[Control Panel]. I)
2 Double click [System] in the control pas_el?_
3 Click the [Hardware]3i tab, and lhen click [Device Manzger].
The Device Manager window appears.
li InWindows XP, selecl [gtart]--[Control Panel].
2i [n Windows XP, double click [Syslem] if the control panel is in lhe "classic" |brm_l, or click
[Performance and Maintenance] and lhen [System] ifthe control panel is in the "category" format.
3i Depending on your system, die [Ilardware] tM)m_y not beprovided. [nthis case, click the[Device
Manager] tab to display the Device Manager window.
If the installation was not successful
• Be sure to close all Windows applications before you start the installation.
if you start the installation while other programs 3re running, a malfunction may occur.
This is especially true lbr programs |hat require large amounts of system resources, such
as virus-check sol}ware.
• Be sure not to connect the Net MD to your computer before you start the
installation.
iflhe dedicated USB c_ble is connected to your computer before lhe installation, the
installation cannot be done correctly. Connect the dedicated USB cable alter the
installation completed.
• Make sure your computer has enough hard disk drive space.
120MB of free space or more on the hard disk drive is required. If your computer does
not have enough space, lhe installation may not be possible.
110