Filter
Top Products
4 Press 1"4<1or _ repeatedly until
the following item appears in the
display, and then press ENTER.
When labeling a "T : Name"
track
When labeling a "D : Name"
disc
The cursor flashes in the letter input
area and the track, group, or disc is
ready to be labeled.
u2.5
Thecursorflashes.
S Press VOL + or to select a letter and
press ENTER.
The selected letter appears and the
cursor moves to the next input
position.
The buttons used for character input
and their functions are listed below.
Functions Operations
To select a Press VOL + or.
character
To enter a letter Press ENTER.
To enter a name Press ENTER for 2
seconds or more.
To insert a blank Press END
space betbre the SEARCtt and press
cursor VOL + at the same
time.
To delete a letter Press END
SEARCtt and press
VOL at the same
time.
'lk_switch capital Press II.
and small letters.
'lk_cancel Press • or MENU.
labeling.
U Repeat step 5, and then enter all
characters of the label name.
'7 Press ENTER for 2 seconds or more
A track or disc is labeled.
To return the preceding
settings
Press •.
To cancel labeling
Press • lbr 2 seconds or more.
Note
When the recording is stopped while labeling a
track or a disc during recording, or when the
recording moves on to the next track while
labeling a track, the input al that point is entered
automatically.
Re-labeling recordings
Follow the procedure of the "Labeling"
(page 40) to relabel a name.
Note
The recorder cannot rewrite a disc or track
name of more than 200 letters that was created
by another device.
For the remote control operation, see
page 60.
41