Filter
Top Products
'7 While observing the level meter in |he
display, adjust lhe recording level by
pressing _ or IHH
Set the level so thol |he maximum
input lights up 1he fifth segment on
|he level meter.
if the six|h segment lights up, lower
|he level by pressing I<1_1.
fifthsegment
L
Recording does not start in this step.
if your source is an externally
connected component, be sure |o cue
|he source to the beginning of|he
ma|erial to be recorded before you
start ployback.
Press II again to start recording.
To switch back to automatic
level control
Select "Aulo" in s|ep 5.
Notes
• You cannot adjust the lett _nd right channel
levels soparate[y
• Once you stop recording, the recorder will
revert to automatic recording [eve[ adju_ment
mode the next time you star_ a recording
operation
• _ adjust the recording level manually during
syochro-recordthg, do steps I to 7 of the
p_cedure in this section with "SYNC-R" is
set to "OFF". Then change the "SYNC-R"
setting to sync "ON", and _art recording
(page 30).