Filter
Top Products
Symptom Cause/Remedy
CZ? flashes in 1he • The rechargeable battery or the alkaline dry battery is used up.
display on the Charge the battery or replace the battery with new LR6 (size
remotu conlrol and AA) alkaline dry battery (page 18).
the radio does not
operate.
Others
Cause/RemedySymptom
The recorder does
not work or works
poorly.
• The rechargeable battery is not charged.
Charge the rechargeable battery.
• The volume is low.
,..O-Iilrn up the volume.
• No disc is inserted.
•._ Insert a recorded disc.
• The HOLD function is turned on ("HOLD" appears in 1he display
when you press an operation button on the recorder).
-O- On the recorder, disable HOLD by sliding the HOLD switch to
the opposite direction of the arrow.
• The lid is not firmly closed.
-O- Close the lid until it clicks. Then slide OPEN to open the lid.
• Moisture has condensed inside the recorder.
,..O-iake the MD out and leave the recorder in a warm place for
several hours until the moisture evaporates.
• The rechargeable battery or dry battery is weak ("LoBATT"
flashes or nolhing appears).
,..O-Charge II_erechargeable battery or replace the dry battery with
the new one, or connect the supplied AC power adaptor to the
recorder.
• The dry battery have been inserted incorrectly.
•._ Insert the battery correctly.
• The disc is damaged or does not contain proper recording or
editing data.
,..O-Reinsert the disc. Rerecord the disc. lfthe error message still
appears, replace it with another disc.
• While operating, the recorder received a mechanical shock, too
much static, abnormal power voltage caused by lightning, etc.
-O- Restart the operation as lbllows.
1 Disconnect all the power sources.
2 Leave the recorder for about 30 seconds.
3 Connect the power source.
77