Filter
Top Products
77
US
Using Multi-zone Features
1 Turn on the amplifier in zone 2.
In the case of illustration 1-1 (page 74),
skip this step.
2 Press ZONE.
The remote control switches to zone 2.
3 Press ?/1.
The zone function is activated.
4 Press one of the input buttons
on the remote control to select
the source signals you want to
output.
For zone 2, analog video and audio
signals are output. When you select
SOURCE, the signals of the current input
in main zone are output.
5 Adjust to a suitable volume.
• In the case of illustration 1-1
(page 74), adjust the volume using
MASTER VOL +/– on the remote
control.
• In the case of illustration 1-2
(page 75), adjust the volume using the
receiver in zone 2. If you set “Line Out”
for “Zone2” to “Variable,” you can also
adjust the volume in zone 2 using
MASTER VOL +/– on the remote
control (page 76).
To finish the zone 2 operation
Press ZONE, then press ?/1.
Notes
•“TV” can be selected in the main zone only.
•Content via a USB device, iPhone/iPod, a home
network, or Internet video is available in zone 2
only when SOURCE is selected.
• You can select either “FM” or “AM” from the main
zone or zone 2. Priority is given to the choice
which has most recently been selected, even if a
different choice has already been selected in one of
the zones.
•You can select only the same channel from
“SIRIUS” when listening in both the main zone
and zone 2 simultaneously. Priority is given to the
channel which has most recently been selected,
even if a different channel has already been
selected in one of the zones.