Filter
Top Products
13
US
LH
Left High
RH
Right High
SL
Surround Left
SR
Surround Right
S
Surround (monaural or the surround
equipment obtained by Pro Logic
processing)
SBL
Surround Back Left
SBR
Surround Back Right
SB
Surround Back (the surround back
equipment obtained by 6.1 channel
decoding)
Example:
Recording format: 5.1
Speaker pattern: 3/0.1
Sound Field: A.F.D. Auto
H LFE
Lights up when the disc being played
back contains an L.F.E. (Low Frequency
Effects) channel.
I SLEEP (page 86)
J BI-AMP (page 89)
K Speaker system indicator
(page 46)
L D.L.L. (page 97)
M D.C.A.C. (page 93)
Lights up when the measurement results
of the “Auto Calibration” function are
applied.
N EQ
Lights up when the equalizer is activated.
O Tuning indicator
Lights up when the receiver tunes to a
radio station.
CAT
The category mode is selected during the
satellite radio operation.
SIRIUS (page 60)
ST
Stereo reception
P MEM
Lights up when the preset memory
function is activated.
Q DTS-HD indicator
Lights up when the receiver is decoding
DTS-HD.
DTS-HD
Lights up constantly with the one of the
following indicators.
MSTR
DTS-HD Master Audio
HI RES
DTS-HD High Resolution Audio
R NEO:6
Lights up when DTS Neo:6 Cinema/
Music decoding is activated.
S DSD
Lights up when the receiver is receiving
DSD (Direct Stream Digital) signals.
T A.P.M. (page 94)
Lights up when the A.P.M. (Automatic
Phase Matching) function is activated.
U D.RANGE
Lights up when dynamic range
compression is activated.
V DTS(-ES) indicator
Lights up when DTS or DTS-ES signals
are input.
DTS
Lights up when the receiver is decoding
DTS signals.
DTS-ES
Lights up with the either following
indicator, depending on the input signal
decoding format.
96/24
DTS 96/24 (96 kHz/24 bit) decoding
continued