Filter
Top Products
25
US
Getting Started
4)
You can connect both the surround back
speakers and the front high speakers.
However, sound cannot be output from the
surround back speakers and the front high
speakers simultaneously.
You can set whether or not to output sound
from the front high speakers using “Sound
Field Mode” (page 71). However, “Sound
Field Mode” may not work, depending on
the sound field setting or input signals.
5)
When you connect a subwoofer with an auto
standby function, turn off the function when
watching movies. If the auto standby
function of the subwoofer is set to on, it goes
into standby automatically based on the level
of the input signal to the subwoofer, and the
sound may not be output.
You can connect two subwoofers to the
receiver. The same signals are output from
each of the SUBWOOFER jacks.
Tip
You can loosen or tighten the SPEAKERS terminal
easily using the supplied speaker cord connection
tool.
ZONE 2 connection
Only if you do not use surround back speakers
and front high speakers, you can assign the
SURROUND BACK/FRONT HIGH/ZONE 2
terminals F and G to the speakers of the
zone 2. Set the SURROUND BACK/FRONT
HIGH/ZONE 2 terminals to “Zone 2 Speaker”
in “Speaker Connection” in the Speaker
Settings menu (page 94).
See “Using Multi-zone Features” (page 74)
for details on connection and operation in
zone 2.
Speaker cord
connection tool
Loosen
Tighten