Filter
Top Products
101
US
Adjusting Settings
c)
480p/576p signals are output even if 480i/576i is
set.
d)
Video signals without copyright protection are
output based on the settings menu. Video signals
with copyright protection are output as 480p/576p.
Notes
•Video signals are not output from the
COMPONENT VIDEO MONITOR OUT or
MONITOR VIDEO OUT jacks when the monitor,
etc., is connected to HDMI OUT jacks.
•If you select a resolution which the connected TV
does not support in the “Resolution” menu, the
images from the TV cannot be output correctly.
•Converted HDMI image output does not support
x.v.Color, Deep Color and 3D.
This function targets content via a USB device, a home network, and Internet video.
x 480i/576i
x 480p/576p
x 720p
x 1080i
x 1080p
* If you play back content that is protected by
Macrovision, the receiver may output the image at
low resolution, or a warning message which
informs that the video signals cannot be output
may appear.
Notes
•If the warning message “Video cannot be output
from this jack.” appears, perform the following
procedure.
1Select “BD/DVD” as the input for the main
zone.
2Set “Playback Resolution” to “480i/576i” or
“480p/576p.”
•If no picture is output when you play back content
via a USB device, a home network, or Internet
video from the Watch/Listen menu, perform the
following procedure.
1Select “BD/DVD” as the input for the main
zone.
2Set “Playback Resolution” to a lower resolution.
Playback Resolution
HDMI OUT
jacks
MONITOR
COMPONE
NT VIDEO
OUT jacks
MONITOR
VIDEO OUT
jack
ZONE 2
COMPONE
NT VIDEO
OUT OUT
jacks
ZONE 2
VIDEO OUT
jack
480i/576i 480i/576i 480i/576i* 480i/576i* 480i/576i* 480i/576i*
480p/576p 480p/576p 480p/576p* 480i/576i* 480p/576p* 480i/576i*
720p (factory default setting) 720p 720p* – 720p* –
1080i 1080i 1080i* – 1080i* –
1080p 1080p 1080i* – 1080i* –
“Playback
Resolution”
menu setting
Output
video
resolution