Filter
Top Products
10
US
Description and location of parts
A ?/1 ON/STANDBY
Press to turn the receiver on or off. When
the power is on, the lamp above the button
lights up in green. If “Control for HDMI”
(page 103), “Pass Through” (page 103),
or “Network Standby” (page 105) is set to
“On,” or the power for zone 2 is turned
on, the lamp above the button lights up in
amber when in the standby mode.
B TONE MODE, TONE
Press TONE MODE repeatedly to select
BASS or TREBLE, then turn TONE to
adjust the bass/treble level of speakers.
C MEMORY/ENTER, TUNING MODE,
TUNING (page 58)
D Remote sensor
Receives signals from remote control.
E Display window (page 12)
F MULTI CHANNEL DECODING lamp
Lights up when multi-channel audio
signals are decoded.
G ZONE SELECT, POWER (page 74)
Press SELECT repeatedly to select zone 2
or main zone. Each time you press
POWER, the output signals for the
selected zone will be turned on or off.
H MASTER VOLUME (page 50)
I SPEAKERS (A/B/A+B/OFF)
(page 46)
J PHONES jack
Connects to headphones.
Front panel
To remove the cover
Press PUSH.
When you remove the cover, keep it out of
reach from children.