Filter
Top Products
135
US
Additional Information
• If you set “Auto Access Permission” to
“On” in “Renderer Options” (page 104),
any controller detected can be available
automatically.
• Is the network controller listed on
“Renderer Options,” and is it set to
“Allow”?
If the box is not checked, check the box for
“Auto Access Permission,” and return to
the home menu. Then, operate the receiver
using the network controller once, and
then uncheck the box for “Auto Access
Permission,” if necessary.
• If the network controller is a computer
software controller, is the software filtered
by antivirus software or firewall software?
Permit UPnP communications between
the software and the receiver. For details,
refer to the operating instructions of the
antivirus software, firewall software, or
network controller software.
The picture/sound is poor/certain
programs display with a loss of detail,
especially during fastmotion or dark
scenes.
• Picture/sound quality may be poor,
depending on Internet content providers.
• Picture/sound quality may be improved by
changing the connection speed. Sony
recommends a connection speed of at least
2.5 Mbps for standard definition video and
10 Mbps for high-definition video.
• Not all videos contain sound.
The picture is small.
• Press V to zoom in.
Cannot play back content.
• Some Internet content requires registration
via a computer before it can be played.
The Control for HDMI function does not
work.
• Check the HDMI connection (page 26, 28,
30, 32).
• Make sure “Control for HDMI” is set to
“On” in the HDMI Settings menu.
• Make sure the connected equipment is
compatible with the Control for HDMI
function.
• Check the Control for HDMI settings on
the connected equipment. Refer to the
operating instructions of the connected
equipment.
• If you change the HDMI connection,
connect/disconnect the AC power cord
(mains lead), or there is a power failure,
repeat the procedures of “Preparing for the
“BRAVIA” Sync” (page 78).
• The types and the number of equipment
which can be controlled by the “BRAVIA”
Sync are restricted in the HDMI CEC
standard as follows.
– Recording equipment (Blu-ray Disc
recorder, DVD recorder, etc.): up to 3
equipment
– Playback equipment (Blu-ray Disc
Player, DVD player, etc.): up to 3
equipment
– Tuner-related equipment: up to 4
equipment
– AV receiver (audio system): up to 1
equipment
When you try to use the One-Touch
Play function, input is not switched as
intended.
• Check the assignment of the HDMI input
(page 82). When you assign multiple
inputs with the same HDMI input jack, if
you use the One-Touch Play function on
the equipment connected to the HDMI
input, the previous input, in its original
input sequence, is preferentially selected.
Internet video
“BRAVIA” Sync (“Control for
HDMI”)
continued