Filter
Top Products
ENGLISH
63
After performing the steps ~ in "Adjusting the current channel level" procedure on page
62, press the CURSOR UP( )/DOWN( ) buttons to select a channel (, not the MODE
(memory mode) and the LFE LEVEL SETUP), then press the ENTER button.
1
Memorizing the adjusted channel levels
• You can memorize the adjusted channel levels into preset memory("REFERENCE 1", "REFERENCE 2")
and recall the memorized whenever you want.
• The "REFERENCE 1" indication flickers.
• Each time the CURSOR LEFT( ) or RIGHT( )
button is pressed, "REFERENCE 1" or
"REFERENCE 2" is selected.
• The adjusted channel levels have now been
memorized into the selected memory.
Press the CURSOR LEFT( )/RIGHT( ) buttons to select the desired preset memory,
then press the ENTER button.
2
• "CALIBRATE" may be displayed instead of
"REFERENCE 1" or "REFERENCE 2".
Press the CURSOR UP( )/DOWN( ) buttons to select the MODE(memory mode).
1
• Then the channel levels memorized into the
selected preset memory are recalled.
Press the CURSOR LEFT( )/ RIGHT( ) buttons to select the desired one of REFERENCE 1
and REFERENCE 2.
2
Recalling the memorized channel levels