Filter
Top Products
ENGLISH
54
When selecting the NAME
• You can give names to the input sources other than tuner.
• Up to 7 characters can be entered for each name.
Press the CURSOR UP( )/DOWN( ) buttons to select the desired input source, then
press the ENTER button.
1
Example: When selecting the VIDEO 1
Press the CURSOR UP( )/DOWN( ) buttons to select the NAME, then press the ENTER button.
2
• The name is stored in the memory.
To resume its factory input source name.
• Make a blank on each digit and press the ENTER
button.
• The first digit flickers.
Press the CURSOR LEFT( )/ RIGHT( )
buttons to select the desired digit.
3
• Then the selected digit will flicker.
Press the CURSOR UP( )/DOWN( )
buttons to enter the desired character on
the flickering digit.
4
• You can enter the desired among blank, A ~ Z,
a ~ z, 0 ~ 9, (, ), , +, , , -, ., /.
Repeat the above steps and to enter the desired characters on the rest of the digits.
5
Confirm your entry.
6
• To turn on the component connected to the DC TRIGGER OUT jack when this input source is selected,
you should set the DC TRIGGER to ON for this input source.
OFF : To turn off the DC trigger function.
ON: To turn it on.
• For details, refer to "CONNECTING DC TRIGGER OUT" on page 9.
When selecting the DC TRIGGER