Filter
Top Products
27
ENGLISH
Erasing all the punch-through functions
programmed under a master device mode
• Then “OK” is displayed and “DELETE” is
displayed.
• To exit from the deleting mode, press any of the
DEVICE buttons.
While “VOL” is displayed, press the
CURSOR UP( )/DOWN( ) buttons to
select the all punch-through deleting
mode (“DELETE”).
2
Perform the steps and in
“Entering a setup code” procedure on
page 20 to select a master device and
the punch-through mode (“PUNCH”).
1
While “DELETE” is displayed, to erase
all the punch-through functions
programmed under the master device
mode, press ENTER button.
3
• Each time the CURSOR UP( )/DOWN( )
buttons are pressed, the mode changes as
follows:
VOL DELETE PLAY CH
• Then “DELETE” is displayed .
• Then “VOL” is displayed on the LCD screen for
several seconds.
To erase all the punch-through
functions programmed under other
master device mode , repeat the above
steps to .
4