Filter
Top Products
96
Automatically Dimming the Screen (Backlight Timer)
If you’re operating the CD-2e on batteries (Page 22), you can set this function so that the
screen will automatically be dimmed to conserve batteries after no operation has been
performed for a certain length of time.
* This setting is effective only when the CD-2e is running on batteries. The screen will not dim if you’re
using the dedicated AC adaptor (Page 21).
1
Press the [MENU] button to access the menu screen, and choose
“Backlight Timer.”
fig.menu-backlight01-e.eps
Press the [MENU] button to access the menu screen.
Use the [ ] [ ] buttons to choose “Backlight
Timer.”
Press the [ENTER] button to confirm your choice.
2
Use the [+] [-] buttons to specify the time after which the backlight will
automatically be dimmed.
fig.menu-backlight02-e.eps
3
Press the [EXIT] button twice.
You’re returned to the audio source screen.
Value
Explanation
Off (factory setting)
The backlight will always remain lit.
2 Sec
The backlight will automatically go dark when the specified time
has elapsed following an operation.
5 Sec
10 Sec
20 Sec
CD-2e_e.book 96 ページ ２００７年９月１０日 月曜日 午後８時５７分