Roland CD-2e CD Player User Manual


 
42
Recording an Electronic Instrument
Here’s how to connect an electronic instrument such as a digital piano or keyboard, and
record your performance.
4
Connect the CD-2e’s LINE IN jacks to your electronic instrument (digital
piano, keyboard, etc.).
Use audio cables to connect the CD-2e’s LINE IN jacks to the output jacks of your
electronic musical instrument.
fig.connect-piano-e.eps
5
Turn the [LINE] knob to adjust the input level at the LINE IN jacks.
Adjust the loudness of the sound you’re recording. Since you’re not using the mic input,
set the [MIC LEVEL] switch to the “MANUAL” position, and then turn the [MIC] knob all
the way to the left (off).
While producing the sound that you will actually be recording, turn the [LINE] knob to
adjust the input level.
Adjust the level so that the peak indicator located above the [LINE] knob lights briefly at
the loudest moments of the performance you’ll be recording.
fig.rec-line-e.eps
If you’re recording to an SD
memory card
If you’re recording to a
CD-R/RW disc
1
Turn on the power.
(
Page 21, 22)
1
Turn on the power.
(
Page 21)
2
Insert the SD memory card.
(
Page 24)
2
Insert the CD.
(
Page 27)
3
Set the audio source to “SD.”
Press the [SD CARD] button so it’s lit.
fig.selectCD-e.eps
3
Set the audio source to “CD.”
Press the [CD] button so it’s lit.
fig.selectSD-e.eps
CD-2e: RCA phono type
Electronic musical instrument: RCA phono type or phone type
Types of plugs that can be connected
* Refer to the owner’s manual of your electronic musical instrument for the appropriate type of plug to use.
RL
To the output jacks of your
electronic musical instrument
LouderQuieter
At this position
Peak indicator
The level meter will move according
to the level of the audio input.
CD-2e_e.book 42 ページ 2007年9月10日 月曜日 午後8時57分