Roland CD-2e CD Player User Manual


 
Troubleshooting
(continued)
115
Advanced UsesRecording Listening Deleting Creating a CD Editing an SD Appendices
Convenient
Functions
Information
/ Display
Checking /
Preparations
SD Memory Card-Related Problems
Problem
Cause and Action
See
Page
The SD memory card is
not detected
Could the SD memory card be of a capacity that is not supported?
Check the capacity of the SD memory card, and use a card of a capacity
supported by the CD-2e.
122
Is the SD memory card inserted all the way into the slot?
Make sure that the card is oriented correctly, and that it’s pushed all the
way into the slot.
24
Could you have turned off the power while recording, or could the SD
memory card have been subjected to a strong impact?
It’s possible that the data has been damaged. Reformat the SD memory
card.
104
Normal playback does
not work
Is the audio source set to “SD”?
Press the [SD CARD] button to choose “SD” as the audio source.
60
Could you have inserted an SD memory card on which nothing has
been recorded?
Insert a different SD memory card.
Could you be using repeat playback?
Turn the repeat setting “Off” so that the or symbol isn’t shown.
65
Could you be using A-B Repeat playback?
Press the [REPEAT] button to get the A-B Repeat icon ( ) to disappear.
Alternatively, press the [ (Stop)] button to stop playback. A-B Repeat
playback will be defeated.
66
Could the playback speed have been changed?
Set the Speed setting to “0” so that the Speed icon ( ) disappears.
67
Could the Pitch setting have been changed?
Set the Pitch setting to “0” so that the Pitch icon ( ) disappears.
63
Could the Key setting have been changed?
Set the Key setting to “0” so that the Key icon ( ) disappears.
62
Could Center Cancel be turned “On”?
Set the Center Cancel to “Off” so that the Center Cancel icon ( )
disappears.
64
Could the [ (Play)] button be blinking?
If the button is blinking, the CD is paused. Press the [ (Play)] button
to defeat pause.
60
CD-2e_e.book 115 ページ 2007年9月10日 月曜日 午後8時57分