Roland CD-2e CD Player User Manual


 
90
Joining Songs
This operation join two songs, making them into a single
song. The song will be joined with the following song.
fig.SDedit-combine-e.eps
1
Insert the SD memory card that you want to edit, and press the
[SD CARD] button.
SD becomes the audio source.
2
Use the [ ] [ ] buttons to select the song you want to join.
This song will be joined with the song that follows it.
3
Press the [MENU] button to access the menu screen, and choose
“Combine?”
fig.menu-combine-e.eps
Press the [MENU] button to access the menu screen.
Use the [ ] [ ] buttons to choose “Combine?”
Press the [ENTER] button to confirm your choice.
4
If you’re sure you want to proceed, press the [ENTER] button.
(If you decide to cancel, press the [EXIT] button.)
fig.combine-mssg-e.eps
The display will show “Processing...” and the songs will be joined. When the operation
is completed, you’re returned to the audio source screen.
A B C
123
Join
A
12
B + C
Track
Number
Track
Number
Progress indication
This editing process will take a certain amount of time. The time required for this operation
will be approximately half the playback time of two songs you’re joining. For example, if
you’re joining a five-minute song and a three-minute song, processing will take
approximately four minutes.
Joining two songs will require free space equal to the size of the two songs being joined.
For example, if you’re joining a five-minute song and a three-minute song, you won’t be
able to execute this operation unless you have at least eight minutes of recording time
remaining.
This operation cannot be performed if the SD memory card’s write protect switch (Page
25) is in the “LOCK” position.
Important
CD-2e_e.book 90 ページ 2007年9月10日 月曜日 午後8時57分